light cured composite splint material

in general light cured composite is the most precise, distortion-free and antiallergenic material for night guards and more

  • primosplint

    light cured composite rods, MMA and peroxide free – for function therapy bite splints and many more applications
  • primosplint function therapy bite splints

    • extremely precise • no noticeable shrinkage • expansion or distortion
  • primosplint function therapy bite splints

  • primosplint

    modelling playdough like consistency at room temperature – no heat needed
  • primosplint

    very quick and easy to work with

    can be easily bonded to other materials (PMMA-acrylic or suck down matrix)

  • primosplint implant surgical guides

    fully autoclavable – no distortion on implant surgical guides during steam autoclaving
  • primosplint transfer and insertion guides

    cures reliably in most conventional light curing units
  • primosplint CT scanning guides

    MMA and peroxide free – lowest allergic potential for the patient no taste or smell
  • primosplint

    checking and insertion guides for veneers
  • primosplint

    PIB – Procera implant bridges
easy, precise, versatile, fast

light cured composite rods, MMA and peroxide free – for function therapy bite splints and many more applications

PRODUCT DETAILS

case pictures

uses

  • function therapy bite splints
  • implant surgical guides
  • night guards
  • CT scanning guides
  • implant x-ray guides
  • implant jigs and verification indexes
  • transfer and insertion guides
  • PIB – Procera implant bridges
  • checking and insertion guides for veneers

advantages

  • very quick and easy to work with
  • modelling playdough like consistency at room temperature – no heat needed
  • cures reliably in most conventional light curing units
  • extremely precise, no noticeable shrinkage, expansion or distortion
  • MMA and peroxide free – lowest allergic potential for the patient
  • fully autoclavable – no distortion on implant surgical guides during steam autoclaving
  • can be easily bonded to other materials (PMMA-acrylic or suck down matrix)
  • no taste or smell and easy to repair
     

     
     

working procedure

technical tips

When opening a new stick of primosplint gently knead it for about 10 to 15 seconds to soften up the material. This will make the material softer and easier to work with.

If adding Primosplint to a suck down matrix, make sure that the surface is roughened well enough before applying primostick bonder.

For maximum clarity lightly sandblast the finished splint (approx. 110 micron aluminium oxide, 30 PSI) inside and outside. Then apply one thin layer of primoglaze on the inside, blow off any access and apply two thin layers on the outside. Light cure according to the instructions.

Do not use strong strobe lights for curing.

background

Primosplint is a thixotropic material, meaning the more energy put into it, the softer and more pliable it gets.

Being a light cured composite, primosplint has the lowest polymerization shrinkage of any material and the best dimensional stability. This means that the result is a most precise passive fit after light curing.

Primosplint provides the highest strength without any brittleness. It protects the natural dentition as well as the TMJ as the material is “abrasion-optimised”. Only premature contacts will wear faster, consequently the TMJ will not be stressed unnecessarily. This leads to guaranteed therapy results satisfying the patients needs.

publications

Spectrum dialogue

Easychecker - The Aesthetic Key

Spectrum dialogue

Implant Retained Overdentures

Spectrum Dialogue

Primosplint: For Faster, Easier Splints

TeamWork

Another Implant Option for Missing Teeth with Challenging Symmetry

Spectrum dialogue

The CT Scanning Guide

Spectrum dialogue

Implant cases made easy

Dental Technologies

primosplint: for faster, easier splints

dentalLABproducts

Custom splint

ordering info

Primosplint PS-Kit1

including:

  • PS100, box with 12 primosplint rods...
Item # : PS-KIT1
primosplint

light cure composite material
Box with 12 rods of  8.3 grams
single packed

Item # : PS100
primostick

light cure bonding material
10 ml bottle

Item # : PS202
primosep

stone model separator
50 ml bottle

Item # : PS203
primoglaze

light cure glaze lacquer
10 ml bottle

Item # : PS204
primoclean

cleaning liquid
50 ml bottle

Item # : PS205
metatouch

Instruments and fingers separator
43g jar

Item # : IM200

downloads

advice for allergy patients

product details

  • function therapy bite splints
  • implant surgical guides
  • night guards
  • CT scanning guides
  • implant x-ray guides
  • implant jigs and verification indexes
  • transfer and insertion guides
  • PIB – Procera implant bridges
  • checking and insertion guides for veneers
  • very quick and easy to work with
  • modelling playdough like consistency at room temperature – no heat needed
  • cures reliably in most conventional light curing units
  • extremely precise, no noticeable shrinkage, expansion or distortion
  • MMA and peroxide free – lowest allergic potential for the patient
  • fully autoclavable – no distortion on implant surgical guides during steam autoclaving
  • can be easily bonded to other materials (PMMA-acrylic or suck down matrix)
  • no taste or smell and easy to repair
     

     
     

When opening a new stick of primosplint gently knead it for about 10 to 15 seconds to soften up the material. This will make the material softer and easier to work with.

If adding Primosplint to a suck down matrix, make sure that the surface is roughened well enough before applying primostick bonder.

For maximum clarity lightly sandblast the finished splint (approx. 110 micron aluminium oxide, 30 PSI) inside and outside. Then apply one thin layer of primoglaze on the inside, blow off any access and apply two thin layers on the outside. Light cure according to the instructions.

Do not use strong strobe lights for curing.

Primosplint is a thixotropic material, meaning the more energy put into it, the softer and more pliable it gets.

Being a light cured composite, primosplint has the lowest polymerization shrinkage of any material and the best dimensional stability. This means that the result is a most precise passive fit after light curing.

Primosplint provides the highest strength without any brittleness. It protects the natural dentition as well as the TMJ as the material is “abrasion-optimised”. Only premature contacts will wear faster, consequently the TMJ will not be stressed unnecessarily. This leads to guaranteed therapy results satisfying the patients needs.

Spectrum dialogue

Easychecker - The Aesthetic Key

Spectrum dialogue

Implant Retained Overdentures

Spectrum Dialogue

Primosplint: For Faster, Easier Splints

TeamWork

Another Implant Option for Missing Teeth with Challenging Symmetry

Spectrum dialogue

The CT Scanning Guide

Spectrum dialogue

Implant cases made easy

Dental Technologies

primosplint: for faster, easier splints

dentalLABproducts

Custom splint

Primosplint PS-Kit1

including:

  • PS100, box with 12 primosplint rods...
Item # : PS-KIT1
primosplint

light cure composite material
Box with 12 rods of  8.3 grams
single packed

Item # : PS100
primostick

light cure bonding material
10 ml bottle

Item # : PS202
primosep

stone model separator
50 ml bottle

Item # : PS203
primoglaze

light cure glaze lacquer
10 ml bottle

Item # : PS204
primoclean

cleaning liquid
50 ml bottle

Item # : PS205
metatouch

Instruments and fingers separator
43g jar

Item # : IM200