in general light cured composite is the most precise, distortion-free and antiallergenic material for night guards and more
-
primosplint
light cured composite rods, MMA and peroxide free – for function therapy bite splints and many more applications -
primosplint function therapy bite splints
• extremely precise • no noticeable shrinkage • expansion or distortion -
primosplint function therapy bite splints
-
primosplint
modelling playdough like consistency at room temperature – no heat needed -
primosplint
very quick and easy to work with
can be easily bonded to other materials (PMMA-acrylic or suck down matrix)
-
primosplint implant surgical guides
fully autoclavable – no distortion on implant surgical guides during steam autoclaving -
primosplint transfer and insertion guides
cures reliably in most conventional light curing units -
primosplint CT scanning guides
MMA and peroxide free – lowest allergic potential for the patient no taste or smell -
primosplint
checking and insertion guides for veneers -
primosplint
PIB – Procera implant bridges
light cured composite rods, MMA and peroxide free – for function therapy bite splints and many more applications
PRODUCT DETAILS
case pictures
uses
- function therapy bite splints
- implant surgical guides
- night guards
- CT scanning guides
- implant x-ray guides
- implant jigs and verification indexes
- transfer and insertion guides
- PIB – Procera implant bridges
- checking and insertion guides for veneers
advantages
- very quick and easy to work with
- modelling playdough like consistency at room temperature – no heat needed
- cures reliably in most conventional light curing units
- extremely precise, no noticeable shrinkage, expansion or distortion
- MMA and peroxide free – lowest allergic potential for the patient
- fully autoclavable – no distortion on implant surgical guides during steam autoclaving
- can be easily bonded to other materials (PMMA-acrylic or suck down matrix)
- no taste or smell and easy to repair
working procedure
technical tips
When opening a new stick of primosplint gently knead it for about 10 to 15 seconds to soften up the material. This will make the material softer and easier to work with.
If adding Primosplint to a suck down matrix, make sure that the surface is roughened well enough before applying primostick bonder.
For maximum clarity lightly sandblast the finished splint (approx. 110 micron aluminium oxide, 30 PSI) inside and outside. Then apply one thin layer of primoglaze on the inside, blow off any access and apply two thin layers on the outside. Light cure according to the instructions.
Do not use strong strobe lights for curing.
background
Primosplint is a thixotropic material, meaning the more energy put into it, the softer and more pliable it gets.
Primosplint provides the highest strength without any brittleness. It protects the natural dentition as well as the TMJ as the material is “abrasion-optimised”. Only premature contacts will wear faster, consequently the TMJ will not be stressed unnecessarily. This leads to guaranteed therapy results satisfying the patients needs.
publications
ordering info
light cure composite material
Box with 12 rods of 8.3 grams
single packed
downloads
advice for allergy patients
A list of various substances/allergens, which are not contained in primosplint.
product details
- function therapy bite splints
- implant surgical guides
- night guards
- CT scanning guides
- implant x-ray guides
- implant jigs and verification indexes
- transfer and insertion guides
- PIB – Procera implant bridges
- checking and insertion guides for veneers
- very quick and easy to work with
- modelling playdough like consistency at room temperature – no heat needed
- cures reliably in most conventional light curing units
- extremely precise, no noticeable shrinkage, expansion or distortion
- MMA and peroxide free – lowest allergic potential for the patient
- fully autoclavable – no distortion on implant surgical guides during steam autoclaving
- can be easily bonded to other materials (PMMA-acrylic or suck down matrix)
- no taste or smell and easy to repair
When opening a new stick of primosplint gently knead it for about 10 to 15 seconds to soften up the material. This will make the material softer and easier to work with.
If adding Primosplint to a suck down matrix, make sure that the surface is roughened well enough before applying primostick bonder.
For maximum clarity lightly sandblast the finished splint (approx. 110 micron aluminium oxide, 30 PSI) inside and outside. Then apply one thin layer of primoglaze on the inside, blow off any access and apply two thin layers on the outside. Light cure according to the instructions.
Do not use strong strobe lights for curing.
Primosplint is a thixotropic material, meaning the more energy put into it, the softer and more pliable it gets.
Primosplint provides the highest strength without any brittleness. It protects the natural dentition as well as the TMJ as the material is “abrasion-optimised”. Only premature contacts will wear faster, consequently the TMJ will not be stressed unnecessarily. This leads to guaranteed therapy results satisfying the patients needs.
light cure composite material
Box with 12 rods of 8.3 grams
single packed
A list of various substances/allergens, which are not contained in primosplint.