light cured universal modeling resin
primopattern is an advanced, ready to use one-component-material that burns out cleanly and completely. primopattern is available as modeling gel and modeling paste
  • primopattern LC Gel & Paste

    perfectly aligned viscosity of Gel and Paste for quick and precise application
  • primopattern LC Gel

    ready to use one-component-material, light cured and thixotrop
  • primopattern LC Gel

    stays where placed – does not run – therefore very economical
  • combined restorations

    easy control of the applied thickness
  • combined restorations

    polymerisation neutral and absolutely dimensionally stable with great fitting properties
  • primopattern LC Paste

    burns out cleanly and completely
  • Implantology

    no distortion, high surface hardness and great strength
  • crowns and bridges

    easy to grind with carbide burs or rubber polishers
  • transfer jig

    light cured cases can be lifted off easily and stress free
  • bite transfer and bite check

    does not contain MMA and peroxide and has no taste or smell
efficient modeling made easy
indispensable light cured material for all cases – for every lab  

PRODUCT DETAILS

case pictures

uses

 

Implantology:

modellations for casting or scanning of

  • implant abutments
  • implant bars
  • implant superstructures
  • tertiary constructions over Galvano mesiostructures

production of

  •  transfer or insertion guides
  • implant jigs, verification indexes, etc


as well as connecting or fixing of single implant parts or segments


fixed restorations:

modellations for casting, scanning or pressing of

  • crowns and bridges
  • understructures for Zirconia copy milling machines
  • Inlays and Onlays
  • understructures for Galvano or Captek bridges

combined restorations:

  • primary and secondary telescopic or conus crowns
  • individual attachments
  • RSS secondary attachments, etc.


bite transfer and bite check (control):

  • transfer splints
  • bite check splint
  • stops and checkbites



further uses:

  • retaining single parts or parts that needed to be separated for welding or soldering
  • fixing of attachments
  • general retaining or fixing of single parts or segments

advantages

primopattern Gel and Paste stand out due to the following product characteristics:

  • ready to use one-component-material, light cured and thixotrop
  • perfectly aligned viscosity of Gel and Paste for quick and precise application
  • stays where placed – does not run – therefore very economical
  • easy control of the applied thickness
  • long working time (> 20 min.) – short curing time (< 5 min.)
  • cures in most conventional light curing units (320nm-500nm)
  • polymerisation neutral and absolutely dimensionally stable with great fitting properties
  • no distortion, high surface hardness and great strength
  • light cured cases can be lifted off easily and stress free
  • easy to grind with carbide burs or rubber polishers
  • burns out cleanly and completely
  • can be used in conjunction with conventional waxes or light cured wax (metacon)
  • does not contain MMA and peroxide and has no taste or smell

working procedure

handling tip

When the syringe is used with a lightly vibrating motion, the material becomes more flowable, when the vibrating motion is stopped, the Gel will stay as placed (thixotropic behaviour).

Slighten moisten your fingers and instruments with metatouch (IM200) before kneading the paste.

technical tips

application:

For applying larger amounts of material at a time efficiently (i.e. for bars, pontics, etc.) use primopattern LC Paste.

Use primopattern LC Gel for the more delicate works that require less layer thickness.

In cases with larger volumes of primopattern material, cover the outer surfaces with a thin layer of conventional modelling wax before investing.

light curing:

primopattern cures in most conventional light curing units that supply a wavelength spectrum of 320nm-500nm.



Most suitable are the Metalight light curing units (primotec), as they are equipped with a special cooling system for most gentle polymerisation.

average polymerisation times in light curing units equipped with:
  

  • UV/UV-A lights (i.e. metalight): 3.5 – 5 minutes
  • halogen lights: 2 minutes
  • strobo lights (i.e. UniXS): 90 seconds

publications

JPD

In-office fabrication of a definitive cast and duplication of ...

JPD

Simplified fabrication of an implant-supported framework

Prosthodontics

Eliminate Casting Distortion

Spectrum dialogue

Implant Retained Overdentures

Spectrum dialogue

No danger of distortion

Spectrum dialogue

One for all - Efficient Modeling made easy

dental-lab-products

Primopattern is basically magic...

dental-lab-products

One layer efficiency

dental-lab-products

A light touch

dentaltown.com

High End Implant and Ceramic Work = Natural results

IDT

Long-Span Implant Precision

ordering info

primopattern LC Gel

light cured universal modelling resin gel (5x3g)

Item # : PA100
primopattern LC Paste

light cured universal modelling resin paste (30 g)

Item # : PA200
primopattern LC Gel clear

light cured universal modelling resin gel clear (5x3g)

Item # : PA300
PE-case insert

for two models (without case and models)

Item # : PA501

downloads

instruction video

animated video

product details

 

Implantology:

modellations for casting or scanning of

  • implant abutments
  • implant bars
  • implant superstructures
  • tertiary constructions over Galvano mesiostructures

production of

  •  transfer or insertion guides
  • implant jigs, verification indexes, etc


as well as connecting or fixing of single implant parts or segments


fixed restorations:

modellations for casting, scanning or pressing of

  • crowns and bridges
  • understructures for Zirconia copy milling machines
  • Inlays and Onlays
  • understructures for Galvano or Captek bridges

combined restorations:

  • primary and secondary telescopic or conus crowns
  • individual attachments
  • RSS secondary attachments, etc.


bite transfer and bite check (control):

  • transfer splints
  • bite check splint
  • stops and checkbites



further uses:

  • retaining single parts or parts that needed to be separated for welding or soldering
  • fixing of attachments
  • general retaining or fixing of single parts or segments

primopattern Gel and Paste stand out due to the following product characteristics:

  • ready to use one-component-material, light cured and thixotrop
  • perfectly aligned viscosity of Gel and Paste for quick and precise application
  • stays where placed – does not run – therefore very economical
  • easy control of the applied thickness
  • long working time (> 20 min.) – short curing time (< 5 min.)
  • cures in most conventional light curing units (320nm-500nm)
  • polymerisation neutral and absolutely dimensionally stable with great fitting properties
  • no distortion, high surface hardness and great strength
  • light cured cases can be lifted off easily and stress free
  • easy to grind with carbide burs or rubber polishers
  • burns out cleanly and completely
  • can be used in conjunction with conventional waxes or light cured wax (metacon)
  • does not contain MMA and peroxide and has no taste or smell

When the syringe is used with a lightly vibrating motion, the material becomes more flowable, when the vibrating motion is stopped, the Gel will stay as placed (thixotropic behaviour).

Slighten moisten your fingers and instruments with metatouch (IM200) before kneading the paste.

application:

For applying larger amounts of material at a time efficiently (i.e. for bars, pontics, etc.) use primopattern LC Paste.

Use primopattern LC Gel for the more delicate works that require less layer thickness.

In cases with larger volumes of primopattern material, cover the outer surfaces with a thin layer of conventional modelling wax before investing.

light curing:

primopattern cures in most conventional light curing units that supply a wavelength spectrum of 320nm-500nm.



Most suitable are the Metalight light curing units (primotec), as they are equipped with a special cooling system for most gentle polymerisation.

average polymerisation times in light curing units equipped with:
  

  • UV/UV-A lights (i.e. metalight): 3.5 – 5 minutes
  • halogen lights: 2 minutes
  • strobo lights (i.e. UniXS): 90 seconds
JPD

In-office fabrication of a definitive cast and duplication of ...

JPD

Simplified fabrication of an implant-supported framework

Prosthodontics

Eliminate Casting Distortion

Spectrum dialogue

Implant Retained Overdentures

Spectrum dialogue

No danger of distortion

Spectrum dialogue

One for all - Efficient Modeling made easy

dental-lab-products

Primopattern is basically magic...

dental-lab-products

One layer efficiency

dental-lab-products

A light touch

dentaltown.com

High End Implant and Ceramic Work = Natural results

IDT

Long-Span Implant Precision

primopattern LC Gel

light cured universal modelling resin gel (5x3g)

Item # : PA100
primopattern LC Paste

light cured universal modelling resin paste (30 g)

Item # : PA200
primopattern LC Gel clear

light cured universal modelling resin gel clear (5x3g)

Item # : PA300
PE-case insert

for two models (without case and models)

Item # : PA501